How to Paint Your Deck With a Push Broom

My house has precisely one outdoor area, which makes it precious. It’s the only spot where we can hang out outside without actually leaving. Since I’m a dedicated introvert who enjoys fake conversations with his cats more than real conversations with people, that’s incredibly important. As a result, I put a lot of time into keeping the deck comfortable and in good repair.

A few years ago, I replaced some of the composite decking with new pieces that didn’t quite match the original color, so I painted the decking to keep things uniform. This past winter was pretty rough on the deck, though, which was starting to look a little worn:

The time had obviously come for a fresh paint job. I chose a lighter color this time and went shopping for the tools I’d need. A roller and a brush? Nope. A regular, cheap push broom and a bender pad.

How to paint a deck with a broom and a bender pad

Here’s all I needed to paint my deck: A paint tray, a can of floor and patio paint, a broom, and a bender pad:

My paint tools for this project.
Credit: Jeff Somers

Painting your deck with a push broom is a lot easier than using a paint roller or a brush. A 10-inch push broom pretty generally covers two deck planks, and the bristles work the paint into the crevices much more efficiently than a roller, requiring fewer passes to get good coverage. And a bender pad is just a flexible, handheld tool that slips easily between tight spaces that need to be painted—like the spaces between deck boards.

Using these two unusual tools, I banged out this paint job in about an hour from start to finish. First, I cleaned the deck using a stiff brush to scrape away any dirt that had crusted on it. I scraped any loose paint away and let the deck dry out thoroughly. Once it was dry, I grabbed the broom and got to work. The key is to choose a push broom with flexible bristles—if they’re too stiff, you won’t get good coverage.

Using the broom to paint the deck.
Credit: Jeff Somers

I alternated between painting the top of the boards and working on the spaces between with the bender bar. Instead of working a sloppy brush in between the boards, the bender pad smoothly pads the sides of the boards, leaving a clean, near-perfect coat. In retrospect, I should have started off by painting the sides first so I didn’t have to twist myself into pretzels at times because the boards were all wet with paint, but that’s a lesson for another time.

Using the bender pad on the deck.
Credit: Jeff Somers

The broom and bender pad combo made painting the deck super easy and fast. If you’ve got a deck you want to paint or stain, forget the rollers and brushes and use a broom and a pad instead. You won’t regret it. Here’s the finished result:

My deck after the paint job.
Credit: Jeff Somers